Fire-Ready and Nontoxic Modern Ranch

This rustic modern ranch home sits on a four-acre parcel within the Wildland Urban Interface (WUI) of Sonoma County, Calif., which means it had to meet the required WUI fire-resistance standards: Roofs must be noncombustible and siding must have reduced flammability. “Wood can still be used, but exposed structural members must be a minimum 4-in.-nominal thickness, and wood siding must be at least 1-in. nominal thickness,” architect Bill Wolpert explains, adding that exterior soffits must be enclosed. Here, he spec’d a metal roof with continuous mineral-­wool insulation and extra thick board-and-batten siding. Mechanical systems were put in the crawlspace, where a 10-mil reinforced vapor retarder was added to keep moisture in check and reduce the number of vents needed. Fewer vents means fewer opportunities for embers to get into the assembly.

Energy efficiency and indoor-air quality were also key objectives. A heat-pump water heater serves the domestic hot-water demand as well as the radiant Warmboard hydronic floor heating system, which in the main living area is covered in slate. Extra insulation in the roof and natural cross-ventilation from strategically placed windows and doors keep the house cool without the need for mechanical cooling equipment. Large sliders open onto a south-facing patio; on the north side, a shady courtyard-inspired outdoor space provides respite on hot days.

Designer: Green Building Architects, greenbuildingarchitects.com

Builder: Artisan Builders, artisanbuilders.net

Location: Sonoma County, Calif.

Photos: Eric Rorer

From Fine Homebuilding #299

RELATED LINKS

• Decks that Stand Up to Wildfire
• Fire-Resistant Details
• Building to Survive in Wildfire Country

Fine Homebuilding Recommended Products

Fine Homebuilding receives a commission for items purchased through links on this site, including Amazon Associates and other affiliate advertising programs.

Respirator Mask

A full-face respirator prevents fog up and is more comfortable than constantly replacing particle makes that get fouled or sweaty and is ideal for the pro installer.

Buy at Amazon

Great Stuff Foam Cleaner

It’s important to clean and maintain a professional foam-dispensing gun, and this product fits the bill. It has a spray applicator for general cleaning, plus it screws onto the dispensing gun so you can clean the inside.

Buy at Amazon

Utility Knife

This utility knife is well-made and comes in handy when cutting rigid foam insulation. You can extend the snap blade to cut through a 2-inch foam board.

Buy at Amazon